Dura-Bond's large diameter pipe coating facility is located on site in Steelton, Pennsylvania. This facility applies fusion bond epoxy on pipe produced at our adjacent mill from 16" diameter through 42" and lengths up to 80’. In addition to external coating, we also offer internal flow efficiency linings as well as Abrasion Resistant Overcoatings for severe service.
The Steelton facility utilizes an induction coil for pipe pre-heating in conjunction with 3 modern natural gas fired main heating ovens to insure a deep heating of the steel as opposed to a quick heating of the outside surface. This is critical for proper cure of the coating especially when thick dual layer fusion bond epoxy is applied. The powder application system consists of 20 hi-flow powder guns and dual powder filtration units that filter both the virgin and reclaimed material. After coating is completed, product moves via conveyors directly to the pipe loading area for shipment or yard storage.
We also have the ability to externally paint pipe with anti-corrosive coatings, apply tape wrap as well as apply epoxy lining for applications such as Jet fuel transfer and potable water.
Home | Site Map | Line Pipe | Steel Fabrication | Custom Coatings | Pipe Coatings
Pipeline Products | Railroad | Overview | News | Past Projects | Contact
©2003 Dura-Bond Industries Inc.